|
Float Tree |
|
STF-106 FTB Float Tree Bracket The float tree bracket is used to mount the float tree (length of schedule 40 PVC pipe) directly to the pump chamber riser. Maintenance, inspections and float adjustments can then be performed without entering the pump chamber. Simply unsnap or slide up the float tree, perform the necessary maintenance and snap the float tree back in place. This also keeps the pump discharge pipe clear of floats, wires, and straps for easy pump removal and replacement. Available to fit 1, 1-1/4 to 1-1/2, and 2 tree. |
|
Tired of having to climb into pump chambers? Straps breaking? Floats hanging up? Tangled wires? To remove straps, floats, & wires to replace a pump? Virtually eliminate these with our Float Tree Accessories! |
|
STF-FHHW Float Holder Hard-Wire The float holder hard-wire has three holes for the float wiring to be threaded through. The holder snaps into place on the float tree hold the float in position. The holder can easily be adjusted to the desired level. The holder keeps the wires organized and away from the effluent pump to virtually eliminate tangled wires and float hang up. Available to fit 1, 1-1/4 to 1-1/2 and 2 tree. |
|
STF-FHPB Float Holder Piggy Back The float holder piggy back performs the same functions as the float holder hard wire, but can be used in situations when the float wiring cant be threaded through holes. Available to fit 1, 1-1/4 to 1-1/2, and 2 tree. |
|
STF-JHOOK Wire Organizer J-Hook The J-Hook is used to organize the excess wire that is needed to allow for the removal of the float tree from the pump chamber. They also come in very handy in any other situation that you are looking to organize wires, cables, ropes, etc. |
|
1455 Lexamar Drive Boyne City, MI 49712 |
|
Toll Free: |
|
Quality Solutions |
|
Copyright © 2009 GAG Sim/Tech Filter, INC. All rights reserved. |
|
See how the Float Tree system works |
